PA 610-279-5777
NJ 856-740-1400

Manufacturers

Gehl Telescopic Handler - RS10-44 GEN:2

Max Lift Capacity - 10,000 lbs., Max Lift Height - 44' 0", Horsepower - 120 hp
Manufacturer: 

The model RS10-44 GEN:2 is built with high quality components, which enhance performance on all levels. This Telescopic Handler is very similar to a fork lift but with a boom attached. The RS10-44 GEN:2 will be able to assist with any agriculture of industry project.

Performance

  • Boom tip lift hook option is now available as a factory-installed option or field installed option.
  • Proven welded box-section boom design makes the boom stronger than competitive models.
  • Well-thought-out cylinder design provides one of the fastest cycle times in the industry.
  • Strong frame with reinforced C-channels performs well under heavy lifting conditions.
  • Frame leveling feature adjusts 10-degrees to the left and right, enhancing performance on uneven terrain.
  • Internal wet disc brakes provide excellent stopping ability and long life.
  • Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.

Handling

Safety and efficiency are two of the most important factors on the jobsite. The RS10-44 GEN:2 provides the tools to achieve both effectively.

  • Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
  • SAHR (spring-applied, hydraulic-release) parking brake is applied automatically when the engine is shut off, or by pressing a rocker switch.

Remote Boom Control

The Remote Boom Control option allows operators to control boom and engine functions from outside the cab.

  • Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
  • Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.

Engine

The RS10-44 GEN:2 Telescopic Handlers provides the power to get work done effectively and efficiently.

  • Dana three-speed power-shift transmission is easy to maintain.
  • Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.


Hydraulics

The model RS10-44 GEN:2 makes no exceptions when it comes to hydraulic performance. These machines can take virtually anything.

  • Dual-function, pilot-assisted joystick is standard equipment.
  • Optional tri-function, pilot-assisted joystick allows the operator to set variable tilt and auxiliary function speeds.
  • Auto-leveling feature keeps loads level when raising/lowering the boom.


RS10-44 Specifications

Dimensions

  • Approximate Weight - 25,500 lbs.
  • Length, Less Forks - 20'0"
  • Width - 8'3"
  • Ground Clearance  - 18"
  • Wheelbase - 10'4"
  • Turning Radius - 13'11"
  • Overall Height - 7'11"
  • Frame Leveling (left/right) - 10°/10°
  • Fuel Capacity - 47 gal.

Capacities

  • Lift Capacity - 10,000 lbs.
  • Maximum Lift Height - 44'0"
  • Capacity at Maximum Lift Height - 8,000 lbs.
  • Maximum Forward Reach - 30'5" 
  • Capacity at Maximum Forward Reach - 1,500 lbs.
  • Maximum Reach Below Grade - 16"

Engine

  • Manufacturer - Cummins
  • Model - QSF 3.8 Tier IV
  • Power - 120 hp
  • Aspiration - Turbo-charged
  • Rated Speed - 2,500 rpm
  • Transmission - Dana 4-Speed Power Shift
  • Maximum Travel Speed - 20.1 mph

Hydraulics

  • Pump Type - Gear
  • Total Capacity  - 41.5 gpm
  • System Pressure - 3,000 psi
  • Hydraulic Reservoir Capacity  - 45 gal. 

Gehl Telescopic Handlers