PA 610-279-5777
NJ 856-740-1400

Manufacturers

WT30 - Honda Heavy-Duty 3" Construction Trash Pump

Capacity - 317 gal./min.
Manufacturer: 

Specially designed for job sites and applications where high volume trash water capacity is needed, the Honda heavy-duty 3 in. construction trash pump features a durable Honda GX series commercial grade engine that is easy starting and provides ample power for the toughest conditions. 

The WT-30 Honda trash pump is available at Norris Sales in Plymouth Meeting, PA (near Conshohocken and Norristown) and Sicklerville, NJ (near Williamston and Glassboro).

Features of the Honda Heavy-Duty 3” Construction Trash Pump WT30

  • Heavy-duty 3" construction trash pump
  • Easy starting Honda OHV commercial engine
  • 317 gal./min capacity
  • Solid handling capability up to 1 1/16"
  • Cast iron volute and impeller
  • Quick clean out port

Specifications on the Honda Heavy-Duty 3” Construction Trash Pump WT30

  • Engine: GX270
  • Displacement: 270 cc
  • Bore and stroke: 3.0" x 2.3"
  • Compression Ratio: 8.5:1
  • Oil Alert: Std
  • Pump type: Trash Centrifugal Self-priming
  • Volute: Rigid Mounted Cast Iron w/ Stainless Wear Plate
  • Impeller: Conical Cast Iron
  • Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Priming time: 90 sec. @ 16.4 ft.
  • Drive system: Direct
  • Discharge capacity: 317 gal/min
  • Suction port diameter: 3"
  • Discharge port diameter: 3"
  • Total head lift: 82 ft.
  • Suction head lift: 26 ft.
  • Maximum pressure: 36 psi
  • Solids handling: 1 1/16 inches
  • Dimensions (LxWxH): 26.0" x 19.5" x 20.3"
  • Dry weight: 134 lb.
  • Fuel Capacity: 1.4 gal
  • Run Time @ Max Discharge: 1.5 hr
  • Strainer Part #: 78325-YG1-003
  • Residential Warranty: 3 years
  • Commercial Warranty: 3 years

Honda trash pump:

Get the job done

The Honda trash pump has a 317 gal. per minute capacity and can handle solids up to 1 1/16 in. The specially designed impeller allows solids to pass through the trash pump easily, without clogging.

Honda trash pump:

Heavy duty protection

Honda's custom-designed full frame protection protects the pump while offering a convenient tie down location for transport. 

Isolation-mounted engine and pump and high-performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Honda trash pump:

Durable and easy to maintain

The WT30 is designed for quick and easy service. An easy access service port makes clean-out quick. The volute (curved funnel necessary for slowing rate of discharge) is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs.

A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.

The Honda WT30 trash pump features abrasion-resistant silicone-carbide seals for extended wear. The rigid-mount cast iron volute reduces case wear, increasing the life of the pump, and the unique conical-shaped impeller improves priming and allows for higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.

Honda trash pump:

Promoting peace of mind

Honda trash pumps are protected by Honda Oil Alert, which protects the pump by shutting the engine off when low oil is detected. A 3 year residential/commercial warranty lets you rest easy, knowing your pump is covered from top to bottom for 3 full years.